Innova Polymeric Dispersant removes the silt deposits from the fins, louvers and pipelines during normal service. It is a polymer and surfactant based product which breaks the clay deposits and remove them with blow down water. It is a neutral pH product and does not cause any corrosion to the system metal during use. It can be dosed manually to the cooling tower sump on a daily basis or can be dosed continuously with a dosing pump. 

It works using a combination of chelation, crystal modification and the threshold effect, and is effective against a wide range of scalants including calcium and magnesium hardness, iron oxide and silica. It converts the scaling material into a light mobile floc, which can be blown down easily. It will gradually re-disperse old deposits and may be used as part of a maintenance \92clean up\92 program.

Key Features and Benefits

• Keeps the cooling tower internals pipelines and louvers clean
• Provides high efficiency to the cooling towers working in high dusty area
• Neutral pH product, biodegradable
• Compatible with other chemicals and all metallurgy

Application and Dosage
Treatment and dosage for Innova Polymeric Dispersant is normally dosed to maintain 50-100 ppm in the system, although, if it is being used as part of a \91clean up\92 programme, higher levels may be maintained.

Innova Polymeric Dispersant is compatible with other commonly used treatments and can be dosed from the same mixing tank. 

For further technical assistance please contact your CSL technical representative. 

Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life. 

Innova Biodispersant is a bio-dispersant designed for open loop cooling water system with high amount of algae, slime and biofilm contamination.

Innova Biodispersant cuts and removes the biofilm for increased efficacy of biocides and microbiocides.

Key Features and Benefits

• Controls MIC (Micro-biologically Induced Corrosion)
• Compatible with other oxidizing, non-oxidizing biocides and treatment chemicals
• Completely biodegradable
• Removes biofilms
• Increases biocide efficacy
• Imparts online cleaning cooling tower fills and louvers
• Controls deposition of silt and clay on the CT basis (sump)
• Stable in all pH range and temperatures

Application and Dosage
Innova Biodispersant should be added directly to the cooling water system with basic procedures. The dosage ranges from 2-20ppm depending on plant condition. Please refer to your CSL service engineer for exact product dosage.

Note : Innova Biodispersant is slightly foaming in nature 

Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life. 

Innova Biodispersant Non-Foaming is a heavy duty bio-dispersant designed for cooling water system with very high amount of algae, slime and biofilm contamination.

Innova Biodispersant Non-Foaming cuts and removes the biofilm for increased efficacy of biocides and microbiocides. 

Key Features and Benefits

• Controls MIC (Micro-biologically Induced Corrosion)
• Compatible with other oxidizing, non-oxidizing biocides and treatment chemicals
• Completely biodegradable
• Removes biofilms
• Increases biocide efficacy
• Imparts online cleaning cooling tower fills and louvers
• Controls deposition of silt and clay on the CT basis (sump)
• Stable in all pH range and temperatures

Application and Dosage
Innova Biodispersant Non-Foaming should be added directly to the cooling water system with basic procedures. The dosage ranges from 5-40ppm depending on plant condition. Please refer to your CSL service engineer for exact product dosage. 

Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.